How to Lay a Flagstone Walkway in an Existing Lawn

In that location is something timelessly appealing about a walkway for patio or backyard. Maybe it'southward because information technology takes the guesswork out of wondering where, in fact, we should be headed. Information technology's all laid out in front end of us, and all nosotros demand to do is walk that way. Or perchance it'southward highly-seasoned because it combines course with function – a beautiful fashion to continue the lawn from appearing trampled on a well-worn (albeit unofficial) path.

View in gallery

If your yard would do good from a flagstone pathway, but you lot're unsure of how to become nigh putting one in, this tutorial will give you the tools you lot need to get started. It'due south not a super-fast home comeback projection, but the procedure is satisfying and the effect absolutely rewarding.

Materials y'all'll demand for flagstone walkway:

• Flagstone slabs (sold by weight; the amount you'll need varies by thickness of the slabs themselves and the spacing between them, and then talk with your landscape products retailer about estimating an amount for your pathway)
• Sand (amount will vary based upon how many flagstone pieces you have. For your reference: a half-yard of sand was sufficient for the walkway shown in this tutorial.)
• Shovels (one regular shovel and one hand shovel)
• Time, energy, and plenty of muscle

How to brand a flagstone walkway patio: Step past Footstep Guide

View in gallery

Step ane: Pathway area

Determine the pathway area. This pathway volition lead from the edge of a concrete patio, through the backyard, to the garden entrance. Information technology will run about iii' broad alongside a landscaped area.

View in gallery

Step 2:  Gravel

Gear up the ground, if necessary. If parts of your pathway are not being laid onto existing backyard, (east.thousand., dirt or gravel), remove excess expanse and rake smooth and level.

View in gallery

Step three: Lay down all flagstone pieces

Lay out the flagstone pieces. Yous don't want to get halfway done with your walkway and realize y'all should've used a different stone somewhere back behind, so we highly recommend laying out all your flagstone pieces earlier you lot do anything else. This takes a little more fourth dimension and endeavor, but it ensures that the end result is exactly what you want.

Tip: Pay attention to the color, smoothness, and cut of each flagstone slice and strategically choose which side you want facing up.

View in gallery

Step 4: Earthworks process

Dig effectually 1 piece of flagstone. Using a hand shovel, with the blade as vertical every bit you can make it, dig advisedly around a flagstone piece. For this footstep, you'll desire to become deep enough to be able to remove the piece of lawn as though it were sod.

View in gallery

Pace 5: Remove sod

Remove sod. Utilize a shovel (vertical blade) to go all around the sod, then lift it out. Lay the flagstone loosely in the hole to make sure information technology will fit.

View in gallery

Footstep 6: Backlog dirt

Remove backlog dirt, down to four"-half dozen". The end goal is to accept the top of your flagstone piece prevarication level with the line of your lawn (the top of the footing before the grass blades shoot upwards). Removing 4"-6" of dirt, depending on the thickness of your flagstone, will allow you to add enough sand to provide a leveling surface for the flagstone.

View in gallery

Footstep 7:  Use level

Pour ii"-4" of sand into the infinite. Smooth and level the sand evenly around the entire hole.

View in gallery

Step 8: Supervene upon

Supervene upon flagstone on acme of sand. Check for level. Adjust the sand level every bit needed, whether that means taking the flagstone out and adding more sand to 1 are or removing sand to lower the flagstone overall. Replace flagstone. Repeat as needed until the flagstone lies flat and at the appropriate height.

View in gallery

Pace ix: Readjust

Step on flagstone, in multiple places, to ensure stability. If the flagstone moves or rocks at all, it is unstable and, therefore, unsafe. Readjust sand levels as needed until flagstone lies apartment and securely on the ground, no matter where you step on it.

View in gallery

Step 10: Continue the process

Congratulate yourself on a job well done…so move on to the next one. Continue this process until all stones are set into the ground.

Tip: If you do have non-grassy areas where your flagstone path will go, we found the most efficient method to be: remove top few inches of surface thing (e.1000., dirt), encompass entire area with 2" of sand, and lay flagstone rocks down in previously adamant organization. Remove every bit much sand every bit possible from between the flagstones, then cut and set up sod strips between them. That is what you lot come across in this photo past the hose hanger.

View in gallery

In that location y'all are! A gorgeous flagstone pathway that guides you lot intuitively from Bespeak A to Bespeak B. Perfect for summertime outdoor enjoyment.

ortonfactere.blogspot.com

Source: https://www.homedit.com/lay-flagstone-pathway-existing-lawn/

Share this post